方法一、通过nmcli

nmcli con add type bond con-name bond0 ifname bond0 mode active-backup

nmcli connection modify bond0 ipv4.method manual ipv4.addresses 10.10.10.10/24 ipv4.gateway 10.10.10.1 ipv4.dns 8.8.8.8 ipv6.method ignore 

bond模式:

mod=0 (balance-rr)Round-robin policy (平衡抢循环策略)

mod=1 (active-backup)Active-backup policy (主-备份策略)

mod=2 (balance-xor)XOR policy (平衡策略)

mod=3 (broadcast) (广播策略)

mod=4 (802.3ad)IEEE 802.3ad Dynamic link aggregation (IEEE802.3ad 动态链接聚合)

mod=5 (balance-tlb)Adaptive transmit load balancing (适配器传输负载均衡)

mod=6 (balance-alb)Adaptive load balancing (适配器适应性负载均衡)

添加真实网口 (例如ens7和ens3)到bond0

nmcli con add type bond-slave ifname ens7 master bond0

nmcli con add type bond-slave ifname ens3 master bond0

激活网口

nmcli con up bond-slave-ens7

nmcli con up bond-slave-ens3

nmcli con up bond0

方法二、通过nmtui

方法三、通过图形界面