1. • 参考标准

FCC CFR 47 Part 2, Clause2.1046

FCC CFR 47 Part 27, Clause27.50(h)

RSS-199, Clause 4.4

2. • 测试方法

During the process oftesting, the EUT was configured to transmit on maximum power and propermodulation. The transmitter power shall be measured in terms of aroot-mean-square (RMS) average value. In case of the EUT was configured to MIMOmode, since the EUT transmits on all antennas simultaneously in the samefrequency range, using the Measure-and-Sum approach, the output power at allantennas were tested, and the total output power were then summedmathematically in linear power units according to FCC KDB 662911 D01.

3. • 限值

Output Power:

(EIRP) 1640 W or 62.15 dBmfor emission bandwidth ≤ 1MHz 1640 W/MHz or62.15 dBm/MHz for emission bandwidth > 1MHz

33 dBW + 10log(X/Y) dBW, where X is the actual channelwidth in MHz and Y is either6 MHz if prior to transition or the stationis in the MBS following transition or 5.5 MHz if the station is in the LBS and UBS following transition